Runco® CrystalSeries™
cx-70dhd lcd
Runco proudly unveils its largest LCD flat panel, the
Crystal Portfolio™ CX-70DHD. The Runco CX-70DHD
is a native 1080p HD LCD that is ideal for rooms of
distinction where a large screen size is desired, but where
ambient light makes front projection difficult and the glare
of a plasma screen simply unacceptable. Beyond its
exceptional contrast, the CX-70DHD features ISF™
calibration for an optimal picture in the most challenging
lighting conditions and the display’s elegant black bezel
matches any room décor.
Native Resolution:
1920 x 1080
Screen Size:
70.3 in. (diagonal)
Screen Aspect Ratio:
Available Aspect Ratios:
Image Area (W x H inches):
DTV Compatibility:
4:3, Letterbox, 16:9 Anamorphic, VirtualWide™
See DHD Controller Specs below
61.56” W x 34.86”H
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
1500:1
Contrast Ratio:
ISF Settings:
Yes
Data/Graphics Compatibility:
Inputs (from DHD Controller):
Up to 1366 x 768
(1) RGB/Component (15-pin D-sub); (1) DVI with HDCP
(1) RS-232 (9-pin D-sub female)
Power Requirements:
Power Consumption:
100-240V AC, 50/60Hz
720 W (1.5 watts in standby), maximum
40 to 95ºF (5 to 35ºC); 20-80% humidity (non-condensing)
Operating Environment:
Dimensions (without stand):
Width: 66.6 in. (1691 mm)
Height: 39.8 in. (1011 mm)
Depth: 5.84 in. (148 mm)
Weight:
158 lbs. (71.66kg)
Limited Warranty:
(2) Two years parts and labor from the date of shipment from Runco.
RuncoCare™ and Runco RedCarpet™ plans are also available.
CX-70DHD Ships with:
Power Cord (US only, 15ft.), remote control unit with (2) AAA batteries,
(1) one 20 foot RJ-11 to RJ-45 serial cable, (1) DVI (male) to HDMI
(Female) adapter, rack-mount hardware for DHD Controller, Manual,
Quick Start guide, (4) Four cable ties.
Specifications are subject to change without notice. ©Copyright 2010 Runco International Inc. All rights reserved.
|