Assembly Instructions for Model: EFVS-II
Thank you for choosing the Sanus Systems Model EFVS-II. Every effort has
been made to ensure that your Sanus Systems furniture is perfect. If you have
questions or feel that there is a problem of any kind, please contact us at
regarding assembly or missing parts. Replacement parts for Sanus systems
products purchased through authorized dealers will be shipped directly to you.
Supplied Parts List: (Threaded fasteners are shown full size)
8˝ Pillar - A
Qty 5
Video Shelf - B
Qty. 1
Shelf Connector - C
Qty. 5
Wire Bushing - D
Qty. 2
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.07.06 (100014)
Step 3 - Place a Video Shelf on 8˝ Pillars
Place the next Video shelf on the 8˝ Pillars.
Thread a new 8˝ Pillar (A) onto each Shelf Connector (C) and firmly hand tighten.
Diagram 3
A
Video
Shelf
8˝ Pillar
C
Step 4 - Secure new Top Video Shelf to 8” Pillars
Place the new Video Shelf (B) on the new 8˝ Pillars (A); then, using an Allen Key and the five Top Bolts, secure the new
Video Shelf to the new 8˝ Pillars.
Install the two new Wire Bushings (D).
Diagram 4
D
Top
Bolt
B
Top
Bolt
A
A
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.07.06 (100014)
|