ritetemp Thermostat GPMG8010 User Guide

Operation 8010  
Once you have installed the  
thermostat, follow the instructions  
below to operate your new  
thermostat.  
Temperature  
Control  
Low Battery  
indicator  
50 60 0 80 90  
1 Configure  
ï Set HEAT/COOL mode switch to  
HEAT or COOL. Set the Fan  
switch to AUTO (automatic).  
2 Set Temp  
Turn the Temperature control to  
select the desired temperature.  
ï Warmer - to the right  
Thermometer  
HEAT/COOL  
Mode Switch  
Fan  
Switch  
Statement of use: The GPMG8010 can be used with most  
24 volt gas, oil or electric heating systems, zoned heating  
systems, heat pumps with or without auxiliary heat, or gas  
millivolt heating systems. It cannot be used with 120 volt  
heating systems.  
ï Cooler - to the left.  
PG 1  
ENGLISH  
COOLER  
WARMER  
3 Operate  
Your thermostat is now in operation.  
ï In the winter, set the system switch to  
HEAT to control your heating system.  
50 60 80 90  
ï In the summer, set the system switch to  
COOL to control your air conditioner.  
ï In spring and fall or when windows are  
open, you can set the system switch OFF.  
ï Setting the FAN switch to AUTO  
automatically runs your system's fan  
during heating and cooling.  
ï Setting the FAN switch to ON runs your  
system's fan continuously even without  
heating or cooling.  
NOTE: LED blinks when batteries are low.  
Caution: System will stop when batteries die.  
PG 2  
 

Quantum Switch ATL M Series User Guide
Quasar VCR VHQ730 User Guide
Renesas Computer Hardware FP 64E User Guide
Riccar Vacuum Cleaner R500 User Guide
Ricoh All in One Printer FAX5600L User Guide
Rosewill Network Card RNX G1 G1W User Guide
Sanyo Air Conditioner 24KLS72 User Guide
Sanyo Microcassette Recorder ICR B50 User Guide
SECO LARM USA Home Security System SD 8103GT PEQ User Guide
Seiko Watch V072 User Guide